Product Category
F a c e b o o o k

QL-15 Lathe

QL-15 Lathe
  • Specifications
  • Standard Accessories
  • Optional Accessories

Specification:

ITEM
QL-15
Capacity Swing over bed Ø 720 (Ø 28.3)
Max. diameter × length STD: Ø 550 × 1100 (Ø 21.6 × 43.3 )
Max. diameter Ø 620 (Ø 24.4)
Bed Slant angle of bed 45 °
Max. travel range of Z/X-axis 1100 / 385 (43.3 × 15.1)
Servo motor of Z/X-axis Z-axis: 4 kW
X-axis: 4 kW
Rapid traverse rates of Z/X-axis 20 / 12 m/min (787 / 472 ipm)
Spindle Diameter of spindle front bearing bore STD: Ø 180 (Ø 7.1)
OPT: Ø 304.8 (Ø 12)
Diameter of spindle bore/bar capacity STD: Ø 131 / Ø 116 (Ø 5.2 / Ø 4.6)
OPT: Ø 218 / Ø 200 (Ø 8.6 / Ø 7.9)
Spindle nose type STD;ASA A2-11; OPT:A2-15
Taper of spindle bore 1/20
Spindle motor STD: 22/26 kW (30/35 HP)
OPT: 30/37 kW (40/49.5 HP)
Spindle speed 40-2000 rpm (4-speed gear)
Chuck diameter STD: Ø 15” (Kitagawa B-15);
OPT: Ø 18”, Ø 24”
Hydraulic Tailstock Quill diameter Ø 125 (Ø 4.9)
Tailstock travel 1080 (42.5)
Quill type Live
Quill taper STD: MT. No.5
Quill stroke 160 (6.3)
Tool Turret Type STD: 8; OPT: 12
Capacity STD: 10; OPT: 8 / 12
Tool shank □ 32 × 32 ( □ 1 × 1)
Index time (T-T) (SEC) 1.5
Drive Motor Coolant motor 860 W (1.1 HP)
Hydraulic motor 2.25 kW (3 HP)
Chip conveyor motor 0.2 kW (1/4 HP)
Accuracy Positioning (Z/X) ±0.005
Repeatability (Z/X) ±0.004
Miscellaneous Power requirement 208-220 Volts / 100 Amps / 30 KVA
OPT: 150 Amps / 40 KVA
Height from floor to spindle center 1300 (51.2)
Floor area (L × W ) 5013 × 2164 (197 × 85)
Packing dimensions (with chip conveyor) 4980 × 2350 × 3040 (196 × 93 × 120)
Net weight 11080 kg (24376 lbs);
11380 kg (with 24” chuck)
Gross weight 12900 kg (28380 lbs)
13200 kg (with 24” chuck)

Standard Accessories

  • FANUC 0i-TD Controller
  • Hydraulic Chuck: 8" (ML-280), 10" (ML-350), 15" (ML-60A)
  • O.D. / I.D. Turning Tools
  • Boring Bar Holders
  • Boring Bar Bushings
  • Taper Sleeves
  • Hydraulic Turret
  • Manual Body Hydraulic Tailstock (ML-350, ML-60A)
  • Tailstock Quill (N/A ML-280)
  • Coolant System
  • Coolant Tank
  • Chip Conveyor + Chip Bucket
  • Leveling Bolts and Pads
  • Grease Lubrication System
  • Work Lamp
  • Foot Pedal for Chuck
  • Tool Kit
  • Grease Gun
  • End of Program Light (3 Colors)
  • Operator's Manual
  • Maintenance Manual
  • Programming Manual
  • Parts List

Optional Accessories

  • FANUC 21i or 18i controller; siements; Mitsubishi; heidenhain
  • Collet Chuck and Hydraulic Cylinder
  • Steady Rest (ML-60A)
  • Bar Feeder
  • Bar feeder Interface
  • 8/12-Tool Hydraulic Turret
  • V.D.I. Turret
  • Power Tooling (C-axis)
  • Centralized Lubrication System
  • Parts catcher
  • Oil and Coolant Separator
  • Automatic Door
  • Oil Mist Collector
  • Foot Pedal for Tailstock
  • Manual Tool Setter
  • Automatic Tool Setter
  • Transformer
  • CE
  • Programmable Tailstock Body (ML-350, ML-60A)